Togu TG-6012 36 inches Solid Standoffs Heavy-Duty Commercial Grade-304 Stainl

Brand: Handle Material: 1.2mm Wall Thickness Commercial Grade-304 Stainless Steel Mounting Outstandings and Fastening Screws Material: 100% Solid German Standard Commercial Grade-304 which will result in a very long durability and usage. Total length: 900mm / 35.433 inches Center-to-Center Mounting Distance: 760mm/29.921 inches Cross-Section Diameter: 32mm/1.26 inches Finish: Matte Black Door Type: Mountable on all types of doors including but not limited to glass and wooden doors, works up to 2.36 inches door thickness. For double doors, 2 pairs are required. Steps for Installation: Drill and create two end to end holes between 0.315 - 0.600 inches (0.375 is recommended) on the door with a Center-to-Center Mounting Distance. Use the Hexagonal Allen wrench to lose the hex socket set screws in the top and bottom pull connection base, remove apart the inner side and outer side of the door pulls.

Put the inner side pull handle and outer side pull handle aligning at each other and tighten the 4 pieces of the hex socket set screws in the top and bottom pull connection base. This completes the installation process. The Net weight of the handle is 2.45 KG/5.40 LB.

-The accessory pack with a clear instruction manual is offered in the package to finish the whole installation effortlessly. With a pair of 95mm/3.74 backup stainless steel 304 threaded bolts to fit most doors, recommended door thickness from 0.31 inch/8mm to up to 2.56 inch/65mm. If you need the long threaded bolts for your door thick up to 2.56 inch/65mm, please send us a message. We will send you the matching accessory kit for free. -Quality 1.2mm Wall thickness, high-endurance SUS 304 stainless steel ladder shape pull handle, Solid mounting standoffs offer a 4.6mm/0.18 efficient deepest engagement length with 4 SUS 304 hexagon socket set screws.

TG-6012 series SUS 304 door pull handles feature a distinctive and durable structure with high ability of rust resistance, corrosion, and deformation for an everlasting lifespan without looseness, let every of your dollars have the highest cost performance. -With a commercial comfortable touch and elegant, clean design, TG-6012 door handles can be used as front entry/entrance door pull handles, shower or commercial glass door pulls, super market and office interior/exterior door pull handles, and wooden barn sliding door pulls to coordinate all modern decorations. Experience industrial commercial quality and create your clean, modern home decor. If you want to install back-to-back handles for French doors, 2 sets are required. -Before purchasing, please distinguish between the hole to hole distance (30 inches) and the total length of the bar (36 inches) to avoid wasting your valuable time.